FAQ
Harley Touring models run a belt final drive, so the first thing to check with any aftermarket swingarm is whether it works with the factory belt. Some swingarms force a change in the drive setup, and others are designed around the stock belt. One option is the NICECNC Rear Swingarm for Harley Touring, which works with the original belt drive, so there is no belt conversion involved.
Rear ride height on a Touring bike is mostly set by where the shock sits and how long it is. The usual routes are adjusting preload, fitting different shocks, or using a lowering kit. A swingarm with more than one lower shock mounting position is another route. NICECNC builds its Touring swingarm with multiple lower shock mount points, so you can raise or lower the rear while keeping the stock shocks.
Road King floorboards hold your legs in one position, so many riders add highway pegs for long highway stretches. Look for a frame-mounted design that is adjustable, so it doesn’t depend on an engine guard and can be set to your leg length. One option is the NICECNC Frame-Mounted Adjustable Highway Pegs, which mount to the Road King’s original frame mounting points and offer 4 footpeg positions and 3 mounting arm positions to dial in your angle and reach.
Several things can cause this, and the cheap ones are worth ruling out first: tire pressure and wear, steering head bearing condition, rear shock preload and condition, and how much weight is loaded on the bike. If those are fine, the remaining cause can be flex and movement between the engine and frame on a rubber-mounted M8 Touring bike. One option for that is the NICECNC M8 Touring Frame Stabilizer, a stabilizer link designed to reduce frame flex, wobble and motor oscillation. It’s made from CNC-machined 6061 aluminum with an alloy steel fisheye bearing.
Yes, the linkage is one of the first things to check. Loose or worn linkage ends add play between your foot and the transmission, and they are cheaper to rule out than internal shift parts. One option is the NICECNC Gear Shifter Rod Linkage, a direct replacement for OEM part 33719-79B, CNC-machined to exact dimensions so there is no rattle, wobble or vibration.
Aftermarket linkages come in several finishes, and the finish matters on a part that sits in plain view next to your boot. NICECNC makes its Gear Shifter Rod Linkage in Black, Chrome Silver, Gold and Black+Orange, and the anodized finish holds up in bad weather.
Shift lever length decides how far your toe has to travel to reach the peg, so a shorter lever brings it closer, which suits shorter riders. One option is the NICECNC Short Heel Toe Shifter Shift Levers, which are 1" shorter than the stock shifter. They are CNC-machined from 6061-T6 aluminum with an anodized finish.
































