Fuel Pump Tester and Transfer Kit For KTM Husqvarna GASGAS

Features:

• The Fuel Transfer Kit is an excellent tool for transferring petrol from one EFI or TPI motorcycle to another when you run out of fuel on the trail, for filling your petrol stove bottle when camping, and as a shop tool for emptying petrol tanks before servicing.Running out of fuel is never fun, but modern fuel-injected motorcycles don't have a fuel petcock to siphon off petrol from your buddy's motorcycle. Of course, you can hang a piece of fuel line in the tank and suck on it to get enough fuel in the line for gravity feed. But this method risks getting petrol in your mouth, which is not enjoyable.
• This NiceCNC Fuel Transfer Kit (FTK) solves this problem and ensures you don't have a bad taste in your mouth.If you use a piece of fuel line with a quick disconnect attached to your motorcycle's quick disconnect, simply pressing the starter button would be enough to transfer fuel. However, do you want to unnecessarily drain the battery and turn over the starter motor for minutes just to transfer a few liters of fuel? It takes nearly a minute to transfer one liter.The FTK kit prevents this issue. It comes with a cable that powers the fuel pump directly from the battery, eliminating the need to turn over the starter motor. Just plug it into the tank connector and quickly attach the cable to the proper battery terminals to start pumping.
• Compact and lightweight trail tool-You can also use the kit in the shop to quickly drain most of the fuel from the motorcycle tank into a fuel canister, but its design primarily focuses on being a compact and lightweight trail tool, you will have a power cable that is as compact as possible when rolled up.The same goes for the FTK fuel line with a quick disconnect. It uses 1 meter of fuel line with a purposely chosen small, 6mm bore size to keep the line very compact when rolled up. As a result, the entire kit is really pocket-size small.
• The fuel line uses the high-quality Polyurethane and stays flexible for a long time compared to PVC fuel line. The power cable connector is the same AMP Superseal connector as the OEM tank connector.

Item Specifications:

• Brand: NICECNC
• Condition: 100% Brand new
• Wire Length: about 50CM
• Tube Length: about 1M
• AMP Connector
• Tube Inside Diameter: 6MM
• Tube Outside Diameter: 8MM
• Tube Material: Polyurethane
• Fuel Line Connector Material: Aluminium

Instructions:

• 1.Take the seat off the bike that will share the fuel,
• 2.Next, disconnect this bike's fuel line quick disconnect,
• 3.Connect the FTK to the bike's quick disconnect fuel line,
• 4.Place the end of the FTK fuel line into the other bike's tank to be filled.
• 5.Unplug the OEM connector powering the fuel pump,
• 6.Plugin the FTK plug.
• 7.Attach the clip to the proper battery terminals.
• 8.When enough fuel has been transferred, pull the clip off the terminals.

Package Included:
1X Fuel Transfer Kit

Fitment:

• For KTM

150 EXC TPI 2020-2023
150 XC-W TPI2020-2024
250 EXC TPI 2018-2024
250 EXC-F 2012-2024
250 SX-F 2011-2024

250 XC TPI 2020-2024
250 XC-F 2011-2024
250 XCF-W 2012-2016
250 XC-W TPI 2018-2024
300 EXC TPI 2018-2024
300 XC TPI 2020-2024
300 XC-W TPI 2019-2024

350 EXC-F 2012-2024
350 SX-F 2011-2024
350 XC-F 2011-2024
350 XCF-W 2012-2024
450 EXC-F 2017-2024
450 SMR 2021-2024
450 SMR 2013-2014
450 SX-F 2013-2025
450 XC-F 2013-2025
450 XCF-W 2023-2024
450 XC-W 2012-2016
500 EXC 2012-2016
500 EXC-F 2017-2024
500 XCF-W 2020-2024
500 XC-W 2012-2016

• For Husqvarna

FC 250 350 450 2017-2024
FC 450 ROCKSTAR EDITION 2018-2021
FE 250 350 450 501 2017-2024


FE 350S 2020-2023
FE 501S 2020-2023
FS 450 2017-2024
FX 350 2017-2024
FX 450 2017-2024

TE 150i 2020-2024
TE 250i 2018-2024
TE 300i 2018-2024
TX 300i 2020-2024

• For GASGAS