Off-Road Headlight Kit 40W / 50W Dual Output For KTM 690 Enduro SMC R 20-24

High-Efficiency Lighting | Plug-and-Play | Designed for Off-Road Riding /Headlight

Features:

• Precision Fit & Secure Installation
  Developed based on 3D scanning, ensuring a precise fit with the OEM headlight housing.
  Secure installation with no looseness.
  Plug-and-play design — no cutting, drilling, or modification required. Maintains the original structure while significantly improving nighttime visibility.
• Adjustable Beam Angle
  The beam direction can be manually adjusted according to riding posture, load, and terrain.
  Adjustment method: Use a 3mm hex key
  • Clockwise: Raise the beam
  • Counterclockwise: Lower the beam
  Enhances adaptability for high-speed and complex off-road conditions.
• Dual Light Source High-Brightness Design (Combined Output)
  Coaxial dual light sources are positioned at the same focal point and illuminate simultaneously.
  Brightness:
  • Single light mode: approx. 3100 lumens
  • Dual light mode: approx. 3600 lumens
  Beam height and pattern remain fixed, but with increased brightness for improved near and far illumination.
  ⚠️ Note: Dual light sources ≠ high/low beam switching. This product does NOT support high/low beam switching.
• Combined Spot + Flood Beam Pattern
  Integrated optical design provides both long-distance spot lighting and wide-angle flood coverage.
  Improves overall visibility during night off-road riding without relying on high/low beam switching.

⚠️Usage Restriction:
For off-road use only. Not intended for public road use. Please comply with local laws and regulations.

LED Specifications: (Per Unit)

• Brand: NICECNC
  
• Power: 40W / 50W
  
• Brightness: 3100 / 3600 lumens
  
• Color Temperature: 6000K / 6500K (close to natural light)
  
• Chip: High-quality LED chips with stable output
  
• Material: 
  
  • Housing: Powder-coated cast aluminium + carbon fiber panel
    
  • Light Bracket: Anodized Aluminium
    
  • Lens: High-strength optical glass
    
• Finish: Powder-coated , Anodized
  
• Waterproof Rating: IP67
  
• Operating Voltage: 10–30V DC
  
• Lifespan: approx. 50,000 hours
  
• Certification: ECE R10
  
• Dimensions: See detailed images

Installation:
Plug-and-play. Ready to use after wiring connection.

Important Notes:

• This product does not come with position light (parking light) function. After installation, the original vehicle position light wiring harness will no longer be used.
• Remove the original position light bulb, and insulate the connector with electrical tape or heat shrink tubing to prevent short circuit, water ingress or electrical faults.
• You shall bear all relevant risks for any problems caused by failure to perform insulation treatment as required.

Fitment:

For KTM 690 Enduro R 2020-2024
For KTM 690 SMC R 2020-2024
For GASGA ES700 2023-2024
For GASGAS SM700 2023-2024